The best site for Articles and news

This is default featured slide 1 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 2 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 3 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Friday, 9 December 2011

Characteristics of a Common Emitter (CE) Amplifier


(1)             Its input resistance is less up to a specific limit (1K to 2K)
(2)             Its output resistance is high up to a proper limit (50K or above)
(3)             Its current gain (B) is high (50 to 300 times)
(4)             Its voltage gain is very high (1500 or more)
(5)             It produces a big power gain (10,0000 times or 40 db)
(6)             It produces “Phase Reversal” of input signal. It means that input signal and output signal are produced at a difference of 180 degree to each other.
Related:
Common Emitter (CE) Amplifier
Circuit Operation of Common Emitter (CE) Amplifier

Share:

Circuit Operation of Common Emitter (CE) Amplifier


When the positive half-cycle of signal is provided
(1)             As the base of transistor is already positive relating to biasing, so voltage (VBC) increases.
(2)             Due to increase in VBE , the forward bias of Emitter-base junction also increases.
(3)             IB is also slightly increased.
(4)             As a result of increase in IB (Base Current), the IC (Collector Current) increase up to B times as (IC = BIB).
(5)             Due to increase of IB , a large increase in ICRC drop occurs.
(6)             VCE decreases according to following equation.
VCE = VCCICRC
Thus, negative half-cycle of input is achieved. It means that when positive input signal is provided to such circuit, then the amplified output signal is negative, (as shown in figure)
When negative half-cycle is provided to input then the achieved output cycle is positive.

    Related:
Share:

Common Emitter (CE) Amplifier


When a transistor is added to a circuit such that, input signal is provided parallel to its emitter-base junction and output is obtained from collector-emitter junction while emitter is common or grounded then such circuit is called common-emitter circuit. This circuit is the most popular method to use transistor as an amplifier.
In other words, “common-emitter circuit” is a circuit in which:
        1.     Emitter is grounded
        2.     Input signal is provided across base
        3.     And output signal is obtained across collector
A signal stage CE amplifier circuit is shown, in the figure, in which NPN transistor is used.
Base is ‘driven element’ in it (it means that base current plays the role of input)
 Input current is provided through base-emitter circuit while, output signal is obtained through collector-emitter circuit.
Emitter base junction is forward biased with battery VB and collector-base junction is reverse-biased with battery VCC. 

       Related:
Share:

Thursday, 17 November 2011

Biasing and Working of PNP Transistor


For the normal operation of a transistor, it is necessary to provide voltage of right polarities to both of its junctions.
For the accurate and normal function of a transistor, its emitter-base junction should be forward biased and collector-base junction should be always reverse biased. As shown in the figure.

In the given method of biasing of PNP transistor, the emitter-base junction is forward biased, while collector-base junction is reverse biased.
Due to forward biasing of emitter-base junction, the majority carriers (holes) flow from emitter towards base. Thus, a big amount of holes crosses the junction and enters base. As the holes enter the base, they combine with electrons present there, (This process known as recombination).Since the base is lightly doped, so the recombination of holes and electrons in base is very low, (Almost 2% to 5%). Thus 95 to 98 percent of holes that came from emitter could not recombine with electrons.

Since the collector-base junction is reverse biased, so holes cannot flow from collector to base due to high resistance. But holes start to flow in the opposite direction (i.e. base to collector) because collector voltage attracts almost 95% holes present in base region. Thus the holes provided by emitter, travelling through base, go to collector-base junction and conventional current starts to flow in PNP transistor.
This should be kept in mind that collector current and emitter current is almost equal but base current is very low. 


GOTO:

Share:

PNP Transistor


A transistor in which an N-type semiconductor is sandwiched between tow P-type semiconductors, is known as PNP transistor. (Shown in Figure)
In the p-region, majority carriers are holes or protons, and in the n-region, majority carriers are electrons.


Symbol of PNP Transistor
As conventional current flows in the transistors, so charge carriers start moving from emitter and they are collected at collector.

Goto:

Share:

Popular Posts